Cold-Weather Heating Performance: What Sets a Cold-Climate Heat Pump Apart

“All heat pumps are the same.” That is what many customers believe, but it is not true. Heat pump performance in extreme cold is precisely what separates equipment designed for Quebec winters from an ordinary model. Here are the technical arguments that will help you explain, and sell, the difference.

Capacity Decreases as Temperatures Drop, but Not Equally

Every heat pump loses some heating capacity as the outdoor temperature falls. The real question is: How much capacity does it retain at the design temperature?

This is where cold-climate models stand apart. Always compare the equipment’s low-temperature capacity curves, rather than relying only on its nominal capacity.

The Balance Point: A Key Indicator

The balance point is the outdoor temperature at which the heat pump’s heating capacity equals the building’s heat loss. A cold-climate heat pump has a lower balance point.

As a result, it can meet the building’s heating needs on its own for a larger portion of the winter, reducing reliance on costly supplemental heating.

COP: Real-World Efficiency

The COP, or coefficient of performance, measures how much heat the system produces for each unit of electricity it consumes.

A higher COP at low temperatures translates into concrete energy savings for the customer—making it a compelling argument when discussing winter electricity bills.

EVI vs. Standard Technology

This is the critical technical difference. EVI technology, or enhanced vapour injection, helps maintain heating capacity at very low outdoor temperatures, where a standard compressor begins to lose performance.

Combined with a two-stage compressor, it provides more precise operation during milder weather and full heating power during extreme cold.

A Ready-to-Use Sales Pitch

“What sets a true cold-climate heat pump apart is its ability to maintain heating capacity during extreme cold. With EVI technology and a two-stage compressor, the WILLIS R32 central system is designed for Quebec winters. It continues heating when it matters most, where an ordinary system begins to fall short.”

👉 Discover the WILLIS R32 central system and our high-efficiency models.

FAQ

How Can You Compare the Cold-Weather Performance of Two Heat Pumps?

Compare their capacity curves and COP values at the actual outdoor design temperature, rather than looking only at their nominal capacity.

What Makes a Heat Pump a “Cold-Climate” Model?

Its ability to maintain heating capacity at low outdoor temperatures, often supported by EVI technology and a two-stage compressor, resulting in a lower balance point.